About
Contact

How do RICS Surveyors Identify Mould and Damp?

Mould and damp are common problems faced by homeowners and tenants in the UK, with reports dominating the news cycle. Here’s how surveyors deal with this rampant issue.

April 30, 2023

Mould and damp are common problems faced by homeowners and tenants. Reports of excessive levels of mould and damp have dominated the news cycle over the last two years, put firmly under the microscope after the tragic case of Awaab Ishak came to light. In the past two years alone, complaints about mould in social housing have doubled.

If left untreated, mould and damp can cause serious health problems and damage to the structure of the building. It could also be true that damage to the structure of the building is one of many potential causes of mould and damp in residential properties.

While the issue of mould and damp remains somewhat under-researched – which has reportedly led to many homeowners and tenants making costly mistakes – surveyors are well versed in the signs and symptoms of mould and damp and can easily identify them.

In this article, we’ll look at how to identify mould and damp, what causes it in the first place, and the role surveyors have in dealing with it.

Identifying the signs of mould and damp

Mould and damp are common problems in many homes, and they can be caused by a variety of factors such as poor ventilation, leaks or high humidity levels. These problems can not only damage a building but can also have negative effects on a person’s health. For that reason, it is crucial to know how to identify the signs of mould and damp so immediate action can be taken, hopefully, to prevent damage to the home and, more importantly, the occupant’s health.

The first and most obvious sign of mould is the musty odour. If a persistent musty odour lingers in the property, it is likely that there is mould growing somewhere. Discoloured spots on walls or ceilings are a common sign of mould, and these spots can be black, green or brown.

Damp, on the other hand, can be identified by peeling wallpaper or blistering paint. This is because the moisture from the dampness causes the adhesive to weaken underneath, resulting in peeling or blistering. This is not only the case inside the home, but outside, too. Wet patches on internal walls are also a clear sign of damp, sometimes causing the paint to become slightly powdery to the touch.

The presence of mould in a building can have a serious adverse effect on people’s health, that much is known. This is especially true for those with underlying respiratory issues. Mould spores trigger asthma attacks and cause allergic reactions, while dampness can lead to the growth of bacteria and viruses that can cause respiratory infections.

What are the causes of mould and damp?

Mould and damp can be caused by a number of factors, such as condensation and even the use of inappropriate building materials. Faulty drainage can also cause dampness, while leaks from services, such as plumbing and mains water pipes, can also be a factor to consider.

Penetrating damp can also be a cause, and it sometimes occurs due to defects in a building’s external envelope or cracks in masonry. Even modern impermeable building materials on breathable traditional building fabrics can be a cause, trapping moisture and therefore resulting in dampness.

To that end, specialist surveying equipment may be needed to find the source of the issue. There are a variety of other “every day” cause to be aware of, too, including:

Poor ventilation

Poor ventilation is one of the most common causes of mould and damp. When there is not enough air circulating in a room, moisture can build up, leading to the growth of mould. This can be caused by a lack of windows or blocked air vents. To prevent this from happening, it is important to ensure that there is adequate ventilation in all rooms. This can be achieved by opening windows, installing air vents, or using a dehumidifier.

Excess moisture

Excess moisture is another common cause of mould and damp. This can be caused by things like leaks, condensation or flooding. Leaks can occur anywhere in the home – in pipes, roofs or windows – and can lead to the build-up of moisture inside walls and ceilings. Condensation occurs when warm air comes into contact with cold surfaces, such as windows or walls. This can be a particular issue in rooms like bathrooms and kitchens, as is well-known by anyone living in the United Kingdom.

Rising damp

Rising damp is a common problem in older buildings that do not have a damp-proof course, or where it has failed. This occurs when water from the ground is absorbed into the walls, leading to the growth of mould and damp. It can be particularly problematic in basements and ground floor rooms, and is not an uncommon site in traditional-built UK properties.

Preventing rising damp can be achieved by installing a damp-proof course. It’s also a good idea to check that the ground outside the building slopes away from the walls rather than towards them, otherwise water might pool up against the property.

How surveyors identify and deal with mould and damp

Surveyors are at the epicentre of home inspections, so are therefore well placed to identify mould and damp, root out the causes and recommend remedial work.

When conducting a home survey, qualified surveyors will use their expertise and specialist equipment to identify the source and extent of any moisture-related problems found during the inspection process. This will involve a visual inspection of the interior and exterior of the building. Surveyors will also assess the condition of the building fabric and any potential leaks or water damage. They will also measure humidity levels to determine the extent of the problem.

In order to do this, a surveyor will use specialist equipment, such as a moisture meter or thermal imaging, so they’re able to identify hidden moisture that is concealed and not immediately apparent to the untrained eye. So if you spot the signs of mould and damp when purchasing a property, be sure to find a RICS surveyor.

Once the cause and extent of the damp and mould have been identified, the surveyor can then provide expert advice on appropriate remedial works to rectify the problem and prevent it from happening again in the future.

When mould and damp is present, it can result in claims under the Homes (Fitness for Human Habitation) Act 2018 and the Housing Act 2004. These can be costly, so understanding the cause of the dampness is crucial for both the landlord and the tenant.

Under law, if it transpires that the tenant is responsible for causing mould growth, then the landlord is not liable for any repairs. In cases like this, it’s therefore important to determine whether the mould and damp growth is due to the use and occupation of the dwelling. To that end, surveyors are able to determine whether it’s a dry, moist, or wet occupancy.

Many surveyors will ensure that the environmental conditions on the day of the inspection are noted and evidenced. They’ll use a variety of instruments to determine this, and in some cases there may be a need for long-term monitoring.

If the surveyor has found that there are no construction or design faults causing dampness and mould, then it could be the case that the building occupants and their activities are the cause of the problem. This can be as simple as failing to ventilate a bathroom after taking a shower or by keeping trickle vents permanently closed.

In conclusion, surveyors play a crucial role in understanding the cause of dampness and mould, and they’re able to determine whether it is indicative of the way people live or the building’s design or fabric. Given their expertise, qualified surveyors are well placed to provide impartial advice on suitable remedial works, so if you spot the signs of mould and damp, be sure to find a RICS surveyor.

About the Author

Warrick Swift
Marketing Director
Warrick is the marketing director at Property Inspect. He has a passion for technology and Dune.
Related Blogs

Subscribe to Property Inspect's newsletter for weekly insights and more

Latest Blogs

The latest insights, news, and resources from the Property Inspect team

READY TO GET STARTED?

Join thousands of property professionals powered by Property Inspect